Radio Controlled Cars Find the best Deals and Discounts on Gas, Nitro and Electric RC Cars

Mini Servo

Electric RC Helicopters are becoming all the rage. Keeping up with the trend, many RC giants have started producing electric helicopter models of their own. Finally, one of the biggest manufacturer, Thunder Tiger, is entering the arena. Having been so successful that their previous line, the "Raptors", have set a standard in nitro helicopters, it is exciting to see weather their new model, the "Mini Titan E325" can do the same for electric helicopters.

Revolutionary Frame Design:

Mini Titan's frame design can be considered truly revolutionary with the most noticeable change being the position of the main gear and the battery. Whereas most other RC helicopters adopt the convention of placing the main gear on top and the battery pack below it, the Mini Titan's main gear is positioned at the lowest possible point in the frame. According to experts, this type of configuration results in a much better roll and yaw response.

The battery's position is equally unique. While most models place the battery pack at the bottom center, the Mini Titan's designer boldly chose to place the battery pack at the very front of the model - mounted on an "L" shaped battery tray and suspended at a slanted angle. While some people may think that this type of battery placement will upset the overall balance of the helicopter, many avid pilots claim that the weight of the battery pack balances out with the weight of the receiver, gyro, and the tail boom to create a one of its kind center of gravity, which allows this helicopter to perform maneuvers exceptionally well.

Main Rotor Control System:

The Mini Titan adopts a 120 degree E-CCPM control system. The swash plate is made of plastic, but although that is the case, it is more durable and heavier than that of most other electric model helicopters. The thrust bearing main grip is of the same type that is used on large scale 3D nitro helicopters which provides precise pitch control. The swash plate also includes a red damper band in the center hub. This fact alone is not really worth mentioning, but the band is of really high quality and goes a long way on the impression factor.

Tail Drive Unit:

The tail system of the Mini Titan is one which truly throws normal convention out the window. The designers have managed to create a tail boom which can be removed and reassembled at will. This is possible because the tail drive system is isolated. As a result, to assemble or disassemble the tail boom takes less than a minute and requires only one screw - which allows this already small helicopter to be even more portable.

Motor, Servo, and Speed Controller Position:

The motor, servo, and speed controller are all positioned differently from other models. To motor is placed at a slightly forward position, but it is kept as close to the center as possible to counteract any rotational force. The speed controller is places at the front-most and lowest point on the frame. This position is claimed to be the most force-resistant as to protect the circuits of the speed controller in case of a crash. The speed controller and the motor are also located in a way that allows air, both from flight and from the rotor, to effective dissipate heat. Designers of the Mini Titan also claim that the new positioning of the servo mount will result in a faster and more accurate overall response.

In flight, the Mini Titan performs outstandingly. With its unique components placement, this helicopter is blessed with a unique center of gravity that allows it to be stable yet responsive. Its maneuverability is as precise and agile as that of a well-established nitro helicopter such as the Raptor. With all the above said, seeing and testing the Mini Titan in flight is breath taking. Unlike other Electric RC Helicopters that are well rated, this model is one that is truly spectacular. Once again, Thunder Tiger doesn't fail to deliver.

About the Author:

Interested in the amazing hobby of Electric RC Helicopters?Tara Soonthornnont is an Electric RC Helicopter enthusiastwho maintains a website dedicated to it.Check Out http://www.electric-rc-helicopter.com

Article Source: ArticlesBase.com - Mini Titan E325 Review

(#EH14) Two Mini Servo For Thunder Bird $18 (#EH14) Two Mini Servo For Thunder Bird

SG90 9g Mini RC Hobby Servo for Helicopter $29.95 Specifications: T-Pro Mini Servo SG-90 -Dimensions: 22.6 x 21.8 x 11.4mm -Weight: 9g -Operating Speed (4.8V no load) : 0.12sec / 60 degrees -Stall Torque (4.8V): 10.2oz / in ( 1.98 kg/cm ) -Temperature Range: -30 to +60 Degree C -Dead Band Width: 4usec -Operation Voltage: 3.5 - 8.4Volts

EXI 500 Carbon Fiber RC Helicopter Kit $799 Ultra lightweight carbon fiber frames and metal blade grips with thrust bearings are two examples of the quality features designed into this great helicopter! Carbon Fiber Frame Version Kit Includes: EXI 500 CF Kit Main Rotor Blades NOT included. This is a kit version, assembly required. (the factory already completed the assembly for the rotor head, tail section, and main frame, you just need to put in the tail boom, main gear, and landing skid Features Electric Power System Simple lightweight design provides an awesome flight performance and extreme 3D capability Rigid Carbon Fiber Frame design Beautiful Factory Painted Fiberglass Canopy Rotor head/tail with thrust bearings Direct to swash CCPM linkage Center of gravity battery tray designed close to the rotor head Tail rotor drive belt system Fully driven tail auto rotation system Tail servo mount boom CNC-Complete Rotor Head CNC-Complete Tail Assembly CNC Aluminum Tail-Boom Holder Specifications: Length: 850mm Height: 310mm Main Blade Length: 425mm Main Rotor Diameter: 970mm Tail Rotor Diameter: 200mm Motor Drive Gear: 12T/13T Main Drive Gear: 162T Autorotation Tail Drive Gear: 145T Tail Drive Gear: 31T Drive Gear Ratio: 1:13.5:4.68/1:12.46:4.68 Weight(w/o power system): 935g Flying Weight: Approx 1700g Radio transmitter and electronic equipment required for assembly: Transmitter(6-channel or more, helicopter system) Receiver(6-channel or more) Mini servo (3) Head lock gyro Specialized Tail Servo Pitch gauge 60A Brushless ESC 500 size Brushless motor (1600KV) 22.2V 6S Li-Poly 2100~2500mAh battery 425mm main blade Complete CNC-Rotor Head Complete CNC-Tail Assembly Carbon Fiber Frame and CNC Base plate Complete CNC Tail Boom Assembly

EXI 500-Class Plastic Edition 3D RC Helicopter ARF Kit $399.95 Ultra lightweight frames and metal blade grips with thrust bearings are two examples of the quality features designed into this great helicopter!     Plastic Version Kit Includes: EXI 500 Plastic Kit Main Rotor Blades NOT included. This is a kit version, assembly required. (the factory already completed the assembly for the rotor head, tail section, and main frame, you just need to put in the tail boom, main gear, and landing skid   Features Electric Power System Simple lightweight design provides an awesome flight performance and extreme 3D capability Rigid Aluminum Frame design Beautiful Factory Painted Fiberglass Canopy Rotor head/tail with thrust bearings Direct to swash CCPM linkage Center of gravity battery tray designed close to the rotor head Tail rotor drive belt system Fully driven tail auto rotation system Tail servo mount boom Complete Rotor Head Complete Tail Assembly Tail-Boom Holder Specifications: Length: 850mm Height: 310mm Main Blade Length: 425mm Main Rotor Diameter: 970mm Tail Rotor Diameter: 200mm Motor Drive Gear: 12T/13T Main Drive Gear: 162T Autorotation Tail Drive Gear: 145T Tail Drive Gear: 31T Drive Gear Ratio: 1:13.5:4.68/1:12.46:4.68 Weight(w/o power system): 935g Flying Weight: Approx 1700g Radio transmitter and electronic equipment required for assembly: Transmitter(6-channel or more, helicopter system) Receiver(6-channel or more) Mini servo (3) Head lock gyro Specialized Tail Servo Pitch gauge 60A Brushless ESC 500 size Brushless motor (1600KV) 22.2V 6S Li-Poly 2100~2500mAh battery 425mm main blade Complete Rotor Head Aluminum Frame and  Base plate Complete Tail Assembly  

EXI 500 Carbon Edition RC Helicopter Kit $799.95 Carbon Fiber Frame Version Kit Includes:EXI 500 CF KitMain Rotor Blades NOT included. Ultra lightweight carbon fiber frames and metal blade grips with thrust bearings are two examples of the quality features designed into this great helicopter! This is a kit version, assembly required. (the factory already completed the assembly for the rotor head, tail section, and main frame, you just need to put in the tail boom, main gear, and landing skid Features Electric Power System Simple lightweight design provides an awesome flight performance and extreme 3D capability Rigid Carbon Fiber Frame design Beautiful Factory Painted Fiberglass Canopy Rotor head/tail with thrust bearings Direct to swash CCPM linkage Center of gravity battery tray designed close to the rotor head Tail rotor drive belt system Fully driven tail auto rotation system Tail servo mount boom CNC-Complete Rotor Head CNC-Complete Tail Assembly CNC Aluminum Tail-Boom Holder Specifications: Length: 850mm Height: 310mm Main Blade Length: 425mm Main Rotor Diameter: 970mm Tail Rotor Diameter: 200mm Motor Drive Gear: 12T/13T Main Drive Gear: 162T Autorotation Tail Drive Gear: 145T Tail Drive Gear: 31T Drive Gear Ratio: 1:13.5:4.68/1:12.46:4.68 Weight(w/o power system): 935g Flying Weight: Approx 1700g Radio transmitter and electronic equipment required for assembly: Transmitter(6-channel or more, helicopter system) Receiver(6-channel or more) Mini servo (3) Head lock gyro Specialized Tail Servo Pitch gauge 60A Brushless ESC 500 size Brushless motor (1600KV) 22.2V 6S Li-Poly 2100~2500mAh battery 425mm main blade Complete CNC-Rotor Head Complete CNC-Tail Assembly Carbon Fiber Frame and CNC Base plate Complete CNC Tail Boom Assembly  

EXI 500 Plastic Edition RC Helicopter ARF Kit $109.95 Ultra lightweight frames and metal blade grips with thrust bearings are two examples of the quality features designed into this great helicopter!  Plastic Version Kit Includes:EXI 500 Plastic KitMain Rotor Blades NOT included. This is a kit version, assembly required. (the factory already completed the assembly for the rotor head, tail section, and main frame, you just need to put in the tail boom, main gear, and landing skid   Features Electric Power System Simple lightweight design provides an awesome flight performance and extreme 3D capability Rigid Aluminum Frame design Beautiful Factory Painted Fiberglass Canopy Rotor head/tail with thrust bearings Direct to swash CCPM linkage Center of gravity battery tray designed close to the rotor head Tail rotor drive belt system Fully driven tail auto rotation system Tail servo mount boom Complete Rotor Head Complete Tail Assembly Tail-Boom Holder Specifications:Length: 850mmHeight: 310mmMain Blade Length: 425mmMain Rotor Diameter: 970mmTail Rotor Diameter: 200mmMotor Drive Gear: 12T/13TMain Drive Gear: 162TAutorotation Tail Drive Gear: 145TTail Drive Gear: 31TDrive Gear Ratio: 1:13.5:4.68/1:12.46:4.68Weight(w/o power system): 935gFlying Weight: Approx 1700gRadio transmitter and electronic equipment required for assembly:Transmitter(6-channel or more, helicopter system)Receiver(6-channel or more)Mini servo (3)Head lock gyroSpecialized Tail ServoPitch gauge60A Brushless ESC500 size Brushless motor (1600KV)22.2V 6S Li-Poly 2100~2500mAh battery425mm main blade Complete Rotor Head Aluminum Frame and  Base plate Complete Tail Assembly  

Walkera HM 4-3B Micro Helicopter 2.4Ghz Metal Aluminum Upgraded Edition $349.95 Walkera HM 4-3B 2.4G Metal Edition is a new generation palm size helicopter equipped with 2.4G advanced radio system and metal upgrades. To compare it with other palm size helicopters, 4#3B offers more stable, silence and smoother flight. It is not a 2-channles toy. It is a serious rc helicopter for players from intermediate to experts. Ready-To-Fly [RTF] indoor helicopters are becoming bigger than ever because of the way they appeal to beginners with their cheap price tags and ease of use. Walkera has proven to be one of the key players who are leading the way when it comes to indoor fixed- pitch helicopters. Their newest edition, the 4#3 with 2.4 GHz transmitter, appears to be a helicopter with great potential that will cater to a broad range of beginners and advanced pilots alike due t o its fixed pitch design and supposedly great indoor capabilities. Getting a helicopter to fly great right out of the box is something that manufacturers are beginning to strive for, but still proves to be a little tricky for some. How well will Walkera?s new little helicopter hold up? This is the latest 2.4Ghz Walkera 4-3, the super micro radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is stable and easy to fly, you can learn how to fly it in 1-2 days. Its overall length is only 185mm controlled by 2 x 3.5g only micro servos. With compact 90 degree swashhplate structure, the servo and other parts are easy to install. The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Walkera HM 4-3B Features The 4#3 comes with a small and simple layout that?s very clean and robust. Everything flows really well, as the writing is organized and all the components are laid out with room to spare. Super mini servo (3g) is prompt and accurate in reaction; One cell Li-Po battery at 3.7V 400mAh offers 8- to 10-minute flight after fully charged; 4-channel transmitter with visible power indicator can avoid helicopter losing control due to the shortage of battery power, and support you to fly without any worry. ROTOR BLADE The main rotor blades are conventional plastic blades commonly found in fixed pitch designs, it is designed with a predetermined angle of attack and both blades are attached together in a single assembly. The blades also have a unique color scheme (which is breath of fresh

Walkera HM 4-3B Micro Helicopter 2.4Ghz Metal Aluminum Upgraded Edition $349.95 Walkera HM 4-3B 2.4G Metal Edition is a new generation palm size helicopter equipped with 2.4G advanced radio system and metal upgrades. To compare it with other palm size helicopters, 4#3B offers more stable, silence and smoother flight. It is not a 2-channles toy. It is a serious rc helicopter for players from intermediate to experts. Ready-To-Fly [RTF] indoor helicopters are becoming bigger than ever because of the way they appeal to beginners with their cheap price tags and ease of use. Walkera has proven to be one of the key players who are leading the way when it comes to indoor fixed- pitch helicopters. Their newest edition, the 4#3 with 2.4 GHz transmitter, appears to be a helicopter with great potential that will cater to a broad range of beginners and advanced pilots alike due t o its fixed pitch design and supposedly great indoor capabilities. Getting a helicopter to fly great right out of the box is something that manufacturers are beginning to strive for, but still proves to be a little tricky for some. How well will Walkera’s new little helicopter hold up? This is the latest 2.4Ghz Walkera 4-3, the super micro radio controlled helicopter, come in Ready-To-Fly package with all the necessary items inside. It is stable and easy to fly, you can learn how to fly it in 1-2 days. Its overall length is only 185mm controlled by 2 x 3.5g only micro servos. With compact 90 degree swashhplate structure, the servo and other parts are easy to install. The tiny 4-in-1 controller is integrated with Receiver, ESC, Gyro and Mixer with high sensitivity and strong resistance to interference. The 4-channels 2.4Ghz transmitter with over 100+ channels allows you to find different 2.4Ghz at the same time without collision, also the power indication avoids the crash caused by lack of transmitter electricity. Walkera HM 4-3B Features The 4#3 comes with a small and simple layout that’s very clean and robust. Everything flows really well, as the writing is organized and all the components are laid out with room to spare. Super mini servo (3g) is prompt and accurate in reaction; One cell Li-Po battery at 3.7V 400mAh offers 8- to 10-minute flight after fully charged; 4-channel transmitter with visible power indicator can avoid helicopter losing control due to the shortage of battery power, and support you to fly without any worry. ROTOR BLADE The main rotor blades are conventional plastic blades commonly found in fixed pitch designs, it is designed with a predetermined angle of attack and both blades are attached together in a single assembly. The blades also have a unique color scheme (which is breath of fresh

Servo Saver, Hitec HS-55: Mini-T $3.67 Team Losi now offers a servo saver to allow the use of Hitec and similar micro servos in their popular 1/18 scale Mini-T race truck. The LOSB1226 is a direct replacement servo saver and includes new servo mounts to fit the Hitec HS55 micro servo. This allows enthusiasts to use aftermarket radios, speed controls and are available for Airtronics and JR servos....

Mini Servo (3W) with Arms, Long Lead $10.97 Mini Servo (3W) w/Arms Long Lead...

Steering Servo: Mini T/V $12.97 Steering Servo: Mini-T/V...

RC 6x SG90 9g 450 se 7ch torque mini mirco Servo 450 BW $0.99

RC 6x SG90 9g torque mini mirco Servo for 45SE 450 V2 $0.99

4x 3.7g Mini Micro RC Servo 250 helicopter plane boat $0.99

4x SG90 9g mini Servo RC hubschrauber 450 se xl 7ch 3S $0.99

4X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $0.99

4x 3.7g Mini Micro RC Servo 250 helicopter plane boat $0.99

4X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $0.99

2 pcs Mini Mirco 5g Rc SG50 Servo For Airplance T343 $12.60

4x SG90 9g mini Servo RC hubschrauber 450 se xl 7ch 3S $0.99

SPORTWERKS SWK4004 STOCK MINI-SERVO CHAOS RTR NEW $5.87

12X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $24.99

4x Esky Digital Mini Mirco 7.5g Rc Servo EK2-0508 K215 $12.61

RC 2x Metal Gear MG90 mini Servo for Trex 450 sg90 9g $0.99

RC 6x SG90 9g 450 se 7ch torque mini mirco Servo 450 BW $0.99

8x Rc Mini Micro 9g Airplane Car Boat Servo SG90 T321 $34.00

HI-TEC HS-55 HS55 SUB MICRO SERVO S/JR/Z for MINI-T NEW $13.87

RC 6x SG90 9g torque mini mirco Servo for 45SE 450 V2 $0.99

6x SG90 SG-90 9g Mini Servo Rc Futaba Hitec HS-55 Heli $0.99

12X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $24.99

6x Rc Mini Micro 9g Airplane Car Boat Servo SG90 T319 $26.10

4x SG90 9g Mini Micro Servo RC plane helicopter Boat x4 $4.99

4x 3.7g Mini Micro RC Servo 250 helicopter plane boat $0.99

4X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $0.99

6x SG90 9g Mini Micro Servo RC plane helicopter Boat $9.99

Hitec HS-81 Mini Servo $5.50

4X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $0.99

4x 3.7g Mini Micro RC Servo 250 helicopter plane boat $0.99

4x SG90 9g mini Servo RC hubschrauber 450 se xl 7ch 3S $0.99

6x MYSTERY 9g Mini Micro Servo RC plane helicopter Boat $9.99

4x 4.3g 3.7g 4.8V-6V Mini Micro Servo RC airplane U $0.01

4x 4.3g 3.7g 4.8V-6V Mini Micro Servo RC airplane U $11.66

RC 2x Metal Gear MG90 mini Servo for Trex 450 sg90 9g $0.99

RC 6x SG90 9g 450 se 7ch torque mini mirco Servo 450 BW $0.99

RC 6x SG90 9g torque mini mirco Servo for 45SE 450 V2 $0.99

RC 2x Metal Gear MG90 mini Servo for Trex 450 sg90 9g $0.99

6x MYSTERY 9g Mini Micro Servo RC plane helicopter Boat $9.99

RC 6x SG90 9g 450 se 7ch torque mini mirco Servo 450 BW $0.99

RC 6x SG90 9g torque mini mirco Servo for 45SE 450 V2 $0.99

4x 3.7g Mini Micro RC Servo 250 helicopter plane boat $0.99

12X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $24.99

4x SG90 9g mini Servo RC hubschrauber 450 se xl 7ch 3S $0.99

4x 3.7g Mini Micro Servo RC plane helicopter Boat $7.99

4X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $0.99

12X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $24.99

10 x 9g SG90 Mini Servo For RC Helicopter Boat Plane $28.88

4x 3.7g Mini Micro RC Servo 250 helicopter plane boat $0.99

4X 12g RC Metal Gear mini Servo for Trex 450 sg90 9g $0.99

4x 3.7g Mini Micro Servo RC plane Helicopter Boat Car $14.98

4x 4.3g Mini Micro Servo RC plane EP200 Helicopter Car $14.98

Hitec HS-225MG Mighty Mini Servo HS225 225mg $24.95

Related posts:

1. Servo Metal Whats the best steering servo for a 1/8 buggy?...
2. Micro Mini micro mini? i bought a new micro mini from...
3. Main Rotor Explain why a helicopter with just one main rotor...
4. Gear Servo Is there a jet type motor available for model...
5. Standard Servo How do you add add ac power from a...

Related posts brought to you by Yet Another Related Posts Plugin.